HABARI NA MAONI
Maarifa ya vipuri, maoni ya sekta na taarifa za kampuni
Hapa tunaandika maswali yanayotokea katika kazi ya kila siku: jinsi ya kuchagua kipuri, wakati wa kubadilisha sehemu inayochakaa na kinachoendelea katika malighafi na maonyesho ya biashara. Maelezo mafupi, kila moja ikiwa na hoja moja wazi.
XCMG XE215EV: a 23.5-ton electric excavator for quieter worksites
With a 423 kWh LFP battery and a 120 kW electric motor, the XE215EV is aimed at urban, tunnel, steel-yard and scrap-handling work. Soma makala→
XCMG XC968-EV: a charge-and-swap loader for heavy-duty handling
Rated at 6,000 kg, the XC968-EV combines fast charging and battery swapping for steel yards, power plants, stockyards and tunnels. Soma makala→
XCMG RP453L: a compact paver for urban roads and maintenance
With a basic paving width of 1.8–3.4 m and a maximum width of 4.5 m, the RP453L is aimed at smaller road projects and maintenance work. Soma makala→
XCMG XCA4000: a 4,000-ton all-terrain crane for major wind projects
The XCA4000 is rated at 4,000 tonnes, travels at up to 70 km/h and is positioned for large wind-turbine installation work. Soma makala→Electric vs gas screed heating: what to check when ordering replacement plates
The screed is the part of an asphalt paver that touches the mix. It runs hot, because a cold plate holds on to the mix instead of releasing it. The two common heating methods behave differently once the plate starts to wear, and that changes which part you need. Soma makala→
Bado hakuna makala katika aina hii
Mkusanyiko wa kwanza unaandaliwa. Ikiwa kuna mada unayotaka tuandike, tuambie.
Ukurasa 1 wa 5
Hujapata unachohitaji?
Omba bei→ Tutumie modeli ya mashine, nambari ya kipuri au picha ya sehemu iliyochakaa; mtu wetu wa mawasiliano atakujibu.
